Tuneable micro- and nano-periodic structures in a free-standing flexible urethane/urea elastomer film

Maria Helena Figueiredo Godinho, A. C. Trindade, João Luís Maia Figueirinhas, Luís Viseu Melo, Pedro Brogueira, Augusto Moita De Deus, Paulo Ivo Cortez Teixeira

Research output: Contribution to journalArticlepeer-review

22 Citations (Scopus)


We have studied the control and manipulation of tuneable equilibrium structures in a free-standing urethane/urea elastomer film by means of atomic force microscopy, small-angle light scattering and polarising optical microscopy. The urethane/urea elastomer was prepared by reacting a poly(propyleneoxide)-based triisocyanate-terminated prepolymer (PU) with poly(butadienediol) (PBDO), with a weight ratio of 60% PU/40% PBDO. An elastomer film was shear-cast onto a glass plate and allowed to cure, first in an oven, then in air. Latent micro- and nano-periodic patterns are induced by ultra-violet (UV) irradiation of the film and can be "developed" by applying a plane uniaxial stress or by immersing the elastomer in an appropriate solvent and then drying it. For this elastomer we describe six pattern states, how they are related and how they can be manipulated. The morphological features of the UV-exposed film surface can be tuned, reproducibly and reversibly, by switching the direction of the applied mechanical field. Elastomers extracted in toluene exhibit different surface patterns depending upon the state in which they were developed. Stress-strain data collected for the films before and after UV irradiation reveal anisotropy induced by the shear-casting conditions and enhanced by the mechanical field. We have interpreted our results by assuming the film to consist of a thin, stiff surface layer ("skin") lying atop a thicker, softer substrate ("bulk"). The skin's higher stiffness is hypothesised to be due to the more extensive cross-linking of chains located near the surface by the UV radiation. Patterns would thus arise as a competition between the effects of bending the skin and stretching/compressing the bulk, as in the work of Cerda and Mahadevan (Phys. Rev. Lett. 90, 074302 (2003)). We present some preliminary results of a simulation of this model using the Finite Element package ABAQUS.
Original languageEnglish
Pages (from-to)319-330
Number of pages12
JournalEuropean Physical Journal E
Issue number4
Publication statusPublished - 1 Jan 2006


  • 61.41.+e Polymers, elastomers, and plastics
  • 62.25.+g Mechanical properties of nanoscale materials
  • 82.20.Wt Computational modeling; simulation


Dive into the research topics of 'Tuneable micro- and nano-periodic structures in a free-standing flexible urethane/urea elastomer film'. Together they form a unique fingerprint.

Cite this