Study on the effect of thermal pre-treatments in the thermophilic anaerobic digestion of a potato peel waste

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This work aimed to study the effect of different pre-treatments applied to a potato peel residue, in a thermophilic Anaerobic Digestion (AD) process. All samples were subjected to a mechanical pre-treatment through milling to a particle size below 2 mm. The thermal pre-treatments applied consisted of autoclaving the residue at a gauge pressure of 1.2 bar, under a temperature of 122°C, and for 20, 35 and 55 minutes: assays E122.20, E122.35 and E122.55, respectively. The control assay was performed on a ground residue, which was not submitted to any thermal pre-treatment. All pre-treated residues were subjected to an AD process in a CSTR reactor at 49±1°C. The experimental data showed that the highest methane percentages were very similar (about 92% v/v) for all samples submitted to the thermal pre-treatments. For the control assay, the highest percentage of methane was 87.9% (v/v). The highest biogas yields were recorded in the trial E122.35 (646±50 cm3.g-1 CODremoved), against only 250±20 cm3.g-1 CODremoved for the control assay. The highest biogas yields for VSremoved were attained in the assays E122.55 and E122.35, with values of 646±48 cm3.g-1 VSremoved and 634±59 cm3.g-1 VSremoved, respectively. Globally, the yields registered for the assay E122.35 were similar to those determined in the assay E122.55. Due to the lower energy consumption during the pre-treatment performed in the assay E122.35, this was considered to be the most suitable pre-treatment for this type of residue.
Original languageUnknown
Title of host publicationBioGas World
Pages138-146
Publication statusPublished - 1 Jan 2013
EventInternational Anaerobic Digestion Symposium within the BioGasWorld 2013 -
Duration: 1 Jan 2013 → …

Conference

ConferenceInternational Anaerobic Digestion Symposium within the BioGasWorld 2013
Period1/01/13 → …

Cite this