Study of annealed indium tin oxide films prepared by rf reactive magnetron sputtering

L. Meng, A. Macarico, R. Martins

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Tin doped indium oxide (ITO) films were deposited on glass substrates by rf reactive magnetron sputtering using a metallic alloy target (In-Sn, 90-10). The post-deposition annealing has been done for ITO films in air and the effect of annealing temperature on the electrical, optical and structural properties of ITO films was studied. It has been found that the increase of the annealing temperature will improve the film electrical properties. The resistivity of as-deposited film is about 1.3×10-1 Ω* cm and decreases down to 6.9×10-3 Ω* cm as the annealing temperature is increased up to 500°C. In addition, the annealing will also increase the film surface roughness which can improve the efficiency of amorphous silicon solar cells by increasing the amount of light trapping.

Original languageEnglish
Pages (from-to)379-384
Number of pages6
JournalMRS Proceedings
Volume388
Publication statusPublished - 1995

Keywords

  • Annealing
  • Doping (additives)
  • Deposition
  • Oxides
  • Substrates
  • Electric conductivity
  • Films
  • Glass
  • Magnetron sputtering

Fingerprint Dive into the research topics of 'Study of annealed indium tin oxide films prepared by rf reactive magnetron sputtering'. Together they form a unique fingerprint.

Cite this