Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS)

Mikhail Mudrov; Anatoliy Ziuzev; Konstantin Nesterov; Stanimir Valtchev

doi:10.1109/ICEPDS.2018.8571801

Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS)

Mikhail Mudrov, Anatoliy Ziuzev, Konstantin Nesterov, Stanimir Valtchev

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Abstract

Power Hardware-in-the-Loop (PHiL) system for electric drives application based on power converter with Field Programmable Gate Array (FPGA) -based control system which realizes in real time model of converter, motor and mechanism is discussed. Two PHiL structures are under consideration. Difference between both of them is shown. Test results obtained in the PHiLs with Converter Under Test (CUT) control system are presented in the paper. Proposed PHIL is intended for converters testing and for their operating modes studying. The PHIL repeats electric drive instantaneous current and angular velocity.

Original language	English
Title of host publication	2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings
Publisher	Institute of Electrical and Electronics Engineers (IEEE)
ISBN (Electronic)	9781538647134
DOIs	https://doi.org/10.1109/ICEPDS.2018.8571801
Publication status	Published - 10 Dec 2018
Event	10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Novocherkassk, Russian Federation Duration: 3 Oct 2018 → 6 Oct 2018

Conference

Conference	10th International Conference on Electrical Power Drive Systems, ICEPDS 2018
Country/Territory	Russian Federation
City	Novocherkassk
Period	3/10/18 → 6/10/18

Keywords

FPGA
HiL
induction motor
PHiL
power inverter
real-time
simulator
vector control system
VFD

Access to Document

10.1109/ICEPDS.2018.8571801

Cite this

Mudrov, M., Ziuzev, A., Nesterov, K., & Valtchev, S. (2018). Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS). In 2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings Article 8571801 Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/ICEPDS.2018.8571801

Mudrov, Mikhail ; Ziuzev, Anatoliy ; Nesterov, Konstantin et al. / Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS). 2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers (IEEE), 2018.

@inproceedings{c8c1dc070bac4ef3a19efb92ceeb8194,

title = "Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS)",

abstract = "Power Hardware-in-the-Loop (PHiL) system for electric drives application based on power converter with Field Programmable Gate Array (FPGA) -based control system which realizes in real time model of converter, motor and mechanism is discussed. Two PHiL structures are under consideration. Difference between both of them is shown. Test results obtained in the PHiLs with Converter Under Test (CUT) control system are presented in the paper. Proposed PHIL is intended for converters testing and for their operating modes studying. The PHIL repeats electric drive instantaneous current and angular velocity.",

keywords = "FPGA, HiL, induction motor, PHiL, power inverter, real-time, simulator, vector control system, VFD",

author = "Mikhail Mudrov and Anatoliy Ziuzev and Konstantin Nesterov and Stanimir Valtchev",

year = "2018",

month = dec,

day = "10",

doi = "10.1109/ICEPDS.2018.8571801",

language = "English",

booktitle = "2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

address = "United States",

note = "10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 ; Conference date: 03-10-2018 Through 06-10-2018",

}

Mudrov, M, Ziuzev, A, Nesterov, K & Valtchev, S 2018, Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS). in 2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings., 8571801, Institute of Electrical and Electronics Engineers (IEEE), 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018, Novocherkassk, Russian Federation, 3/10/18. https://doi.org/10.1109/ICEPDS.2018.8571801

Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS). / Mudrov, Mikhail; Ziuzev, Anatoliy; Nesterov, Konstantin et al.
2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers (IEEE), 2018. 8571801.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS)

AU - Mudrov, Mikhail

AU - Ziuzev, Anatoliy

AU - Nesterov, Konstantin

AU - Valtchev, Stanimir

PY - 2018/12/10

Y1 - 2018/12/10

N2 - Power Hardware-in-the-Loop (PHiL) system for electric drives application based on power converter with Field Programmable Gate Array (FPGA) -based control system which realizes in real time model of converter, motor and mechanism is discussed. Two PHiL structures are under consideration. Difference between both of them is shown. Test results obtained in the PHiLs with Converter Under Test (CUT) control system are presented in the paper. Proposed PHIL is intended for converters testing and for their operating modes studying. The PHIL repeats electric drive instantaneous current and angular velocity.

AB - Power Hardware-in-the-Loop (PHiL) system for electric drives application based on power converter with Field Programmable Gate Array (FPGA) -based control system which realizes in real time model of converter, motor and mechanism is discussed. Two PHiL structures are under consideration. Difference between both of them is shown. Test results obtained in the PHiLs with Converter Under Test (CUT) control system are presented in the paper. Proposed PHIL is intended for converters testing and for their operating modes studying. The PHIL repeats electric drive instantaneous current and angular velocity.

KW - FPGA

KW - HiL

KW - induction motor

KW - PHiL

KW - power inverter

KW - real-time

KW - simulator

KW - vector control system

KW - VFD

UR - http://www.scopus.com/inward/record.url?scp=85060469603&partnerID=8YFLogxK

U2 - 10.1109/ICEPDS.2018.8571801

DO - 10.1109/ICEPDS.2018.8571801

M3 - Conference contribution

AN - SCOPUS:85060469603

BT - 2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings

PB - Institute of Electrical and Electronics Engineers (IEEE)

T2 - 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018

Y2 - 3 October 2018 through 6 October 2018

ER -

Mudrov M, Ziuzev A, Nesterov K, Valtchev S. Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS). In 2018 10th International Conference on Electrical Power Drive Systems, ICEPDS 2018 - Conference Proceedings. Institute of Electrical and Electronics Engineers (IEEE). 2018. 8571801 doi: 10.1109/ICEPDS.2018.8571801

Power electrical drive Power-Hardware-in-the-Loop system: 2018 X International Conference on Electrical Power Drive Systems (ICEPDS)

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this