TY - JOUR
T1 - Electrochemical CO2 reduction in ionic liquids
T2 - a 3D modeling approach
AU - Fernandes, Inês S.
AU - Messias, Sofia
AU - Martins, Rodrigo
AU - Mendes, Manuel J.
AU - Reis-Machado, Ana S.
N1 - info:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/LA%2FP%2F0037%2F2020/PT#
info:eu-repo/grantAgreement/FCT/6817 - DCRRNI ID/UIDP%2F50025%2F2020/PT#
info:eu-repo/grantAgreement/FCT/Concurso de avaliação no âmbito do Programa Plurianual de Financiamento de Unidades de I&D (2017%2F2018) - Financiamento Base/UIDB%2F50025%2F2020/PT#
info:eu-repo/grantAgreement/FCT/Concurso de Projetos IC&DT em Todos os Domínios Científicos/PTDC%2FEQU-EPQ%2F2195%2F2021/PT#
https://doi.org/10.3030/101124803#
https://doi.org/10.3030/101148726#
Funding Information:
This work received funding from FCT (Fundação para a Ciência e Tecnologia, I.P.) under the projects LA/P/0037/2020, UIDP/50025/2020 and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication—i3N, and by the project CO2RED (DOI 10.54499/PTDC/EQU-EPQ/2195/2021). The work was also supported by the project M-ECO2—Industrial cluster for advanced biofuel production, Ref. C644930471-00000041, co-financed by PRR—Recovery and Resilience Plan of the European Union (Next Generation EU). The authors also acknowledge funding from the European Union via the projects X-STREAM (Horizon EU, ERC CoG, No. 101124803 DOI: https://doi.org/10.3030/101124803) and SolarWay (HORIZON-MSCA-2023-PF-01, No. 101148726 DOI: https://doi.org/10.3030/101148726).
Publisher Copyright:
© 2025 The Author(s). Published by IOP Publishing Ltd.
PY - 2025/8/14
Y1 - 2025/8/14
N2 - The escalating pressure to mitigate CO2 emissions calls for novel approaches to produce sustainable fuels and chemicals, as means to close the anthropogenic cycle. This study fulfills a critical need in this field, through the development of modeling tools capable of guiding groundbreaking technical advances in liquid-phase electrochemical CO2 reduction (ECR). An unprecedented 3D model for porous cathodes was designed for the co-electrolysis of CO2 and water to produce syngas, particularly considering aqueous and ionic liquid (IL) electrolytes to increase CO2 solubility in the electrolyte while lowering its density and kinematic viscosity to boost ECR process performance. The structural parameters of the cathode, i.e. porosity and pores geometry, were investigated, together with the effects of operational parameters such as type of electrolyte, flow rate, temperature and pressure. A key outcome was the demonstration of a flow electrolytic system, coupled with an improved porous zinc cathode, capable of producing CO partial current densities of 231 mA cm−2 at −1.1 V vs. RHE, with a composition suitable for up-stream methane production (H2:CO ratio of 3:1), at 10 bar, 45 °C, and 10 mL min−1, reaching the threshold for industrial-relevant yields. Such results show that the combination of tailored IL-based electrolytes and advanced cathode design enables to greatly overcome mass transport limitations and improve reaction dynamics. These results open a new path towards the use of computational smart-search methods to improve the industrial implementation of ECR in liquid-phase.
AB - The escalating pressure to mitigate CO2 emissions calls for novel approaches to produce sustainable fuels and chemicals, as means to close the anthropogenic cycle. This study fulfills a critical need in this field, through the development of modeling tools capable of guiding groundbreaking technical advances in liquid-phase electrochemical CO2 reduction (ECR). An unprecedented 3D model for porous cathodes was designed for the co-electrolysis of CO2 and water to produce syngas, particularly considering aqueous and ionic liquid (IL) electrolytes to increase CO2 solubility in the electrolyte while lowering its density and kinematic viscosity to boost ECR process performance. The structural parameters of the cathode, i.e. porosity and pores geometry, were investigated, together with the effects of operational parameters such as type of electrolyte, flow rate, temperature and pressure. A key outcome was the demonstration of a flow electrolytic system, coupled with an improved porous zinc cathode, capable of producing CO partial current densities of 231 mA cm−2 at −1.1 V vs. RHE, with a composition suitable for up-stream methane production (H2:CO ratio of 3:1), at 10 bar, 45 °C, and 10 mL min−1, reaching the threshold for industrial-relevant yields. Such results show that the combination of tailored IL-based electrolytes and advanced cathode design enables to greatly overcome mass transport limitations and improve reaction dynamics. These results open a new path towards the use of computational smart-search methods to improve the industrial implementation of ECR in liquid-phase.
KW - 3D finite-elements modeling
KW - Electrochemical CO reduction
KW - Ionic liquid-based electrolytes
KW - Porous cathodes
KW - Sustainable carbon-to-fuel conversion
UR - https://www.scopus.com/pages/publications/105013190314
UR - https://www.webofscience.com/wos/woscc/full-record/WOS:001551444900001
U2 - 10.1088/2515-7655/adf6e5
DO - 10.1088/2515-7655/adf6e5
M3 - Article
AN - SCOPUS:105013190314
SN - 2515-7655
VL - 7
SP - 1
EP - 18
JO - JPhys Energy
JF - JPhys Energy
IS - 4
M1 - 045012
ER -